Stewart Audio

Founded in 1982, Stewart Audio is a USA based manufacturer of innovative amplifiers and associated products.

The product portfolio is characterised by extremely small form factor products 1/4, 1/3 and 1/2 rack width units. Packed in to these small size products are a wealth of features that gives system designers and integrators the tools to create intelligent installations.

Amplifiers are available with Dante Network Audio, CobraNet, DSP, USB and RS232 control and other interesting features.

Stewart Audio’s Dante enabled products can now be seamlessly integrated with Symetrix DSP and Atterro Tech network end-points using Symetrix SymNet Composer software.

Visit Site

DSP100-2-LZ

The DSP100-2-LZ is a 2 channel DSP-enabled amplifier 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimise sound quality for small and medium zones to fit a broad range of applications.

• Onboard full featured DSP
• Configurable via USB port
• Convection cooled, 1/2 rack enclosure
• 2 balanced + 2 RCA analog line/mic inputs
• Not Dante™ Networked (See DSP100-2-LZ-D)
• Remote Volume Control

DSP100-1-CV

The DSP100-1-CV is a 1 channel DSP-enabled amplifier 1/2 rack amplifier delivering 100W at 70/100V, with built in DSP and remote volume control. This amplifier is designed to optimise sound quality for small and medium zones to fit a broad range of applications.

• Onboard full featured DSP
• Configurable via USB port
• Convection cooled, 1/2 rack enclosure
• 2 balanced + 2 RCA analog line/mic inputs
• Not Dante™ Networked (See DSP100-1-CV-D)
• Remote Volume Control

DSP100-2-CV

The DSP100-2-CV is a 2 channel DSP-enabled amplifier 1/2 rack amplifier delivering 100W per channel at 70/100V, with built in DSP and remote volume control. This amplifier is designed to optimise sound quality for small and medium zones to fit a broad range of applications.

• Onboard full featured DSP
• Configurable via USB port
• Convection cooled, 1/2 rack enclosure
• 2 balanced + 2 RCA analog line/mic inputs
• Not Dante™ Networked (See DSP100-2-CV-D)
• Remote Volume Control

FLX80-4-LZ

The FLX80-4-LZ is  a 4 channel, 4/8 Ohm, 1/2 rack amplifier delivering 80W per channel with built in DSP . The integral DSP includes a full cross-point mixer, EQ, filters, limiters and much more. While RS232 control and remote volume control allow the use of numerous user interfaces.

• On board DSP for signal routing and filtering
• USB and RS232 available for configuration
• 1/2 rack package
• 4 analog inputs (4 line/mic; 2 w/ phantom power)
• Not Network enabled (See FLX80-4-LZ-D)

FLX160-2-LZ

The FLX160-2-LZ is  a 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 160W per channel with built in DSP . The integral DSP includes a full cross-point mixer, EQ, filters, limiters and much more. While RS232 control and remote volume control allow the use of numerous user interfaces.

• On board DSP for signal routing and filtering
• USB and RS232 available for configuration
• 1/2 rack package
• 4 analog inputs (4 line/mic; 2 w/ phantom power)
• Not Network enabled (See FLX160-2-LZ-D)

FLX80-4-CV

The FLX80-4-CV is  a 4 channel, 70 / 100V  1/2 rack amplifier delivering 80W per channel with built in DSP . The integral DSP includes a full cross-point mixer, EQ, filters, limiters and much more. While RS232 control and remote volume control allow the use of numerous user interfaces.

• On board DSP for signal routing and filtering
• USB and RS232 available for configuration
• 1/2 rack package
• 4 analog inputs (4 line/mic; 2 w/ phantom power)
• Not Network enabled (See FLX80-4-CV-D)

FLX160-2-CV

The FLX160-2-CV is  a 2 channel, 70 / 100V  1/2 rack amplifier delivering 160W per channel with built in DSP . The integral DSP includes a full cross-point mixer, EQ, filters, limiters and much more. While RS232 control and remote volume control allow the use of numerous user interfaces.

• On board DSP for signal routing and filtering
• USB and RS232 available for configuration
• 1/2 rack package
• 4 analog inputs (4 line/mic; 2 w/ phantom power)
• Not Network enabled (See FLX160-2-CV-D)

FLX320-1-CV

The FLX320-1-CV is  a 1 channel, 70 / 100V  1/2 rack amplifier delivering 320W per channel with built in DSP . The integral DSP includes a full cross-point mixer, EQ, filters, limiters and much more. While RS232 control and remote volume control allow the use of numerous user interfaces.

• On board DSP for signal routing and filtering
• USB and RS232 available for configuration
• 1/2 rack package
• 4 analog inputs (4 line/mic; 2 w/ phantom power)
• Not Network enabled (See FLX320-1-CV-D)