Furman

Furman has been producing high-quality products since 1974. Initially the company was focused on audio electronics for recording studios.

Nowadays Furman have a range of power products for numerous applications including sound reinforcement; home and professional recording; post production; broadcast systems; commercial audio/video installation; and commercial/residential energy monitoring and management.

Furman’s focus on engineering innovative, leading edge AC power technologies has led to revolutionary developments such as the trusted, professional-grade Series Multi-Stage Protection, Linear Filtering Technology, Extreme Voltage Shutdown, True RMS Voltage Regulation, and Power Factor Technology.

Visit Site

Merit Series

The Merit series are low-cost AC power conditioners, offering spike and surge protection as well as RFI/EMI noise protection. On the M-10xE there are ten IEC 10 amp rear outlets in two isolated banks of five plus a front panel IEC outlet and the unit is rated for a total load of 10 amps. The inlet is a 10 amp IEC male connector.

While the M-10LXe is the same as the M-10x, but with the addition of two front panel pop-out LED lamp units with a dimmer control, for illumination of the equipment rack controls.

Classic Series

The Classis series 'PL' all share a common set of features. 'Series Multistage Protection' provides surge protection up to 6000V and 3000A pulses, far in excess of common spikes. 'Linear Filtering Technology' gives protection against RFI and other induced line-noise. 'Extreme Voltage Shutdown' detects creeping voltage rises that reach 15% over the norm and powers down the system. There are ten IEC 10amp rear outlets in two isolated banks of five plus a front panel IEC outlet. The front panel has a power on/off switch and two pop-out LED lamp units with dimmer control, for illumination of the equipment rack controls. On the rear panel there is a BNC connector to accept a gooseneck lamp.

The PL-8CE has 10 amp total rated load, IEC 10 amp input connector.

The PL-PlusCE is the same as the PL-8CE but with an LED bar-graph voltage indicator.

The PL-PRO-DMC-E is the same as the PL-8C but has a 16 amp total current rated and uses a 16 amp IEC input connector. The PL-PRO-DMC-E is also fitted with a digital display that shows line voltage and true RMS current.