Aurora Multimedia IPX SDVoE

Aurora Multimedia IPX 10G SDVoE AV-Over-IP

IPX is the most advanced AV-over-IP solution available today.  Like all of Aurora’s IPBaseT® products, IPX combines the SDVoE standard with a variety of additionaltechnologies and features under one unifed protocol using a simplified topology.

Uncompressed video with zero-latency, with low latency, seamless switching, video wall and multiviewer modes, digital audio, USB 2.0, Ethernet, and control are just some of the core capabilities of IPBaseT®.

Utilizing thebandwidth of a 10Gbps copper or fiber Ethernet networks, IPX supports large scalable audio/video matrixing, and it does so while replacing multiple technologies and products with a “single-box” distributed platform. The days of needing a separate AV switcher, control system, Video Wall processor, audio/DSP converter, and more are a thing of the past.

Visit Site

The First and Most Advanced SDVoE Solution

There are a number of manufacturers producing SDVoE products but Aurora Multimedia were the first with IPX. Below you can find out why IPX is also the most advanced SDVoE solution available today.

Video Over IP Wallplate

Aurora developed the ­first SDVoE™ product

Aurora Multimedia has been manufacturing SDVoE products for 5 years making IPX the most mature and proven solution available today.

Aurora was the innovator of 10G PoE powered transceivers

Better serviceability, no inventory disproportions, allows end user to keep spares on site due to low SKU.

The only SDVoE™ transceiver wall plate

Application example: Room combine — Set one wall plate in front of room (decoder), set another in rear of room (encoder). This will allow multiple options for presenter to display source at either end of room and or supply presenter with a confidence monitor. It takes only 20 seconds to change locally or remotely between encoder and decoder modes.

Advanced Audio DSP Built In

Ability for you to control volume, mix audio, duck audio, and adds additional DSP capabilities like filters and EQ. Dante™/AES67 (2-Channel and 8-Channel): Aurora IPX Series are the only SDVoE™ solution to do this, and it complements our Audio DSP so it can be fed back into the local HDMI® output or sent over stream. Aurora was also the first company to ever integrate Dante with an AV over IP stream almost 4 years ago (2015).

Reversible USB 2.0 — assign as Device or Host

Allows the PC to be on the encoder or decoder side. Same for the devices. Aurora was the first to allow ExtremeUSB® to change directions at will.

10G PoE

Aurora is the only SDVoE™ product to date to integrate 10G PoE, providing for clean installations and eliminating external power supplies. Aurora now offers the IP-24PoE+ 10G PoE+ injector which adds remote power to any 10G switch.

ReAX™ Control

Aurora is only company to integrate full IP control system into an SDVoE™ product.

1RU and 5RU Rack Mounts

We can install 12 units in a 5RU which saves rack space.

Flexible MAC, IP Address and Host-Name Routing

IPX is the only SDVoE™ solution that can route this way. Other solutions must strictly use MAC address only. This gives Aurora a huge serviceability advantage with control systems, as our competition has to either hard code or put a hidden service page to match the new mac address when unit is replaced to the location. All you have to do to commission a new unit is to change the IP address and host name, with no changes to code at all.

ExtremeUSB® SDVoE™ protocol

Other brands using USB must use a different protocol from SDVoE™ which makes it more complex. Aurora added this ability into our SDVoE™ server.

Independent Telnet Port for Serial and IR

This allows you to make a 2-way tunnel to any unit. It provides a virtual COM port for any 3rd party control, so no macro is needed. Our competitors need to poll for RS-232 feedback.

Advanced Audio DSP Built In

Ability for you to control volume, mix audio, duck audio, and adds additional DSP capabilities like filters and EQ. Dante™/AES67 (2-Channel and 8-Channel): Aurora IPX Series are the only SDVoE™ solution to do this, and it complements our Audio DSP so it can be fed back into the local HDMI® output or sent over stream. Aurora was also the first company to ever integrate Dante with an AV over IP stream almost 4 years ago (2015).

Encrypted Connection to Server

Other manufacturers use only unsecured Telnet. Aurora allows for unsecured or secured control. Overall better enterprise security.

2 HDMI® Inputs and 1 HDMI® Output

When an encoder, 2 inputs to select from with a local monitoring viewing. As a decoder, instead of losing an HDMI® input from our device, we gain 2 HDMI® inputs locally in addition to the streaming video.

Only Dual 10G SDVoE™ Fibre Solution on the Market

Allows for redundant network switch backbone.