D10

The flagship model of the Distributed Design Series, the D10 exceeds the performance of competing "high-ceiling" models. The D10 provides high-level foreground music, loud-and-clear paging (even in noisy environments), and readily supports large systems in sports facilities, clubs, or concert venues for delay and zone fill. Characterized by powerful, musical performance and superb speech intelligibility, the D10 represents a significant change in the ceiling speaker market segment.

D10's can readily be combined with smaller members of the Distributed Design Series due to Community's uniform voicing technology, providing additional power and LF response in areas that require it. True coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity permitting 3 dB to 6 dB greater output level, while requiring half the amplification power of competing products.

Exclusive Drop-Stop™ and Twist-Assist™ tabs allow single-handed placement to speed installation and reduce labour time. Drop-Stop's spring-loaded legs support the back can on the included tile rails and snap-on C-ring, so that the installer no longer needs to hold the can against the tile while tightening the clamps. Twist-Assist performs a similar function for the baffle assembly: when the loudspeaker back cans are pre-installed into a conduit system for termination at a later date, a simple twist of the baffle into the back can brings the Twist-Assist clips together, supporting the baffle assembly while the installer fastens the screws.

The front-face wattage selector switch enables quick adjustment of 70V/100V tap levels. A variety of installation accessories are available to accommodate different ceiling materials. The D8 face-only assembly and back can are also available for separate purchase.

Specification

Loudspeaker Type 2-way, full-range, coaxial loudspeaker
Operating Range 75 Hz / 20 kHz (+/- 5 dB)
Max Input Ratings (8 ohm)
200 W continuous, 500 W program
Wattage Tap Selections 200 / 100 / 50 watts @ 100 V
200 / 100 / 50 / 25 watts @ 70 V
Sensitivity 1W/1m 98 dB
Maximum Output 121 dB SPL / 127 dB SPL (peak 8 ohm)
Nominal Impedance 8 Ohms
Nominal Dispersion

88º conical (1 kHz to 6 kHz)
100º conical (500 Hz to 6 kHz)

Crossover Frequency 1 kHz
Recommended Signal Processing 58 Hz high pass filter
Drivers LF 1 x 10"
HF 1 x 1.25"exit compression driver
Driver Protection Self resetting solid state breaker
Input Connection Removable Phoenix terminal block
Controls Front face tapping selector
Enclosure Zinc plated steel back can, ABS baffle
Finish White grille and baffle
Mounting / Rigging Provisions 4 steel mounting clamps
Grille White powder coated steel
Supplied Accessories C-ring supporting plate
Tile support bridge rails
Grille
Paint mask
Cut-out template
Flat screwdriver
Optional Accessories D10-NCB New Construction Bracket
Dimensions Depth: 254 mm (10")
Diameter: 380 mm (15")
Cutout: 359 mm (14.125")
Weight 10.5 kg (23.1 lbs)

Community D10 high power coaxial ceiling speaker

Features

  • High intelligibility
  • Exceptional uniform coverage
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial drivers
  • Tru-Phase™ high-frequency waveguide
  • Patented Carbon Ring Cone Technology™
  • Spring loaded Drop-Stop™ installation assistant tabs
  • C-ring to simplify installation
  • Tile bridge support rails and snap-on C-ring support
  • Twist-Assist™ loudspeaker face retainer tabs
  • ¾-inch and 1-inch knock-outs on back can
  • External loop-through Euroblock connectors
  • Rear cover with cable clamp and conduit knockout
  • Selectable 8 ohm or 70V/100V operation
  • Back can and face-only packages available
  • Five year warranty

Downloads

Spec Sheet (408 KB)
Brochure (610 KB)
Manual (6.3 MB)

Norwood Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119
Copyright © 2005 - 2015 Community UK Limited, All rights reserved
Sitemap
Follow CUKaudio on Twitter Follow CUKaudio on Facebook CUK Audio on LinkedIn