R6-Basshorn

The R6-BASSHORN is a high output, high power low frequency system designed for long throw applications in larger arenas, stadiums, and other large scale facilities requiring high output levels with superb clarity. The R6 will array with effectively increased pattern control and, through mutual coupling, with higher efficiency at lower frequencies.

The R6-BASSHORN has six, high sensitivity 12 inch drivers with powerful, heavy-duty motor structures mounted in a one-piece fiberglass, 42 Hz flare rate horn that is surrounded by a rigid fiberglass weatherproof cap.

The R6-BASSHORN is designed as an optimum low frequency complement to horn-loaded full-range systems (such as the R2) in terms of its output level, pattern control, frequency range and physical dimensions. Proper implementation with a full-range system requires an electronic crossover and alignment signal delay along with appropriate equalization. Community's DSC42 Digital System Controller is ideally suited to provide these functions.

All R-Series loudspeakers are protected by a 5 year limited component warranty and a 15 year limited enclosure warranty.

R6-Basshorn

Specification

Loudspeaker Type:  Low Frequency Horn System
Operating Range:  45 Hz - 500 Hz
  55 Hz - 450 Hz (+/-4 dB)
Max Input Ratings:  1200W continuous, 3000W program
  80 volts RMS, 178 volts momentary peak
Recommended Power Amplifier: 2500W to 3600W @ 5.3 Ohms
Sensitivity 1W/1m: 108 dB SPL (50 Hz - 315 Hz 1/3 octave bands)
Maximum Output: 139 dB SPL / 146 dB SPL (peak)
Nominal Impedance:  5.3 Ohms
Min Impedance:  3.9 Ohms @ 175 Hz
Nominal -6 dB Beamwidth:  90° H x 60° V @ 315 Hz
Axial Q / DI:  9.1 / 9.6, 315 Hz
Recommended Signal Processing: 150 Hz - 300 Hz electronic crossover
  40 Hz high pass filter
Drivers:  (6) 12", Ferrofluid-cooled
Driver Protection:  None
Input Connection:  4 foot (1.2m) SJOW #16 Gauge
Controls:  None
Enclosure:  Hand-laminated fibreglass , grey gel-coat
Mounting / Rigging Provisions: (2) 1/2 - 13 threaded mounting points
  (10) 7/16" holes on horn flange
Grille:  3-layer Weather-Stop™ (Perforated steel, foam, stainless steel mesh)
Required Accessories: Electronic crossover
Supplied Accessories: None
Dimensions: Height: 49 in. / 1245 mm
  Width: 37 in. / 940 mm
  Depth: 43.5 in. / 1105 mm
Weight:  204 lb. / 92.5 kg
Shipping Weight:  269 lb. / 122 kg
Applications
  • Stadiums, Athletic Fields
  • Arenas
  • Music Pavilions
  • Large Public Gatherings

Features

  • All-Weather, all Fiberglass Enclosure
  • Horn Loaded
  • High Efficiency, High Output
  • Six High Powered 12" Drivers
  • Excellent Transient Response
  • Predictable LF Pattern Control
Downloads

Spec Sheet (75KB)
Brochure (925KB)
Drawings
EASE Data (109KB)

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119