R.5COAX-99

The R.5COAX-99 high fidelity, two-way, full-range loudspeaker system is engineered to provide quality full-range sound in a variety of outdoor and indoor applications. It is designed to withstand exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers.

Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion.

The R.5COAX-99 has a 12-inch (300mm) cone LF driver and a 1-inch (25 mm) exit HF compression driver with a weather resistant diaphragm. The enclosure and HF horn are moulded from grey polyethylene. All exposed hardware is stainless steel. The Weather-Stop™ grille assembly, retained by stainless steel screws to the front of the enclosure, consists of three layers.

R.5COAX-99T version includes an input transformer with switchable taps to provide impedance matching to 70V or 100V lines.

All R-Series loudspeakers are protected by a 5 year limited component warranty and a 15 year limited enclosure warranty.

R.5COAX-99

Specification

Loudspeaker Type:  2-way, co-axial, weather resistant
Operating Range:  50 Hz - 16 kHz
  90 Hz - 13 kHz (+/-3.5dB)
Max Input Ratings:  200 W Continuous, 500 W Program
  40 volts RMS, 89 volts momentary peak
Transformer taps with 70 V / 100 V option: 200 / 100 / 50 / 25 watts
Recommended Power Amplifier: 420W to 600W @ 8 Ohms
Sensitivity 1W/1m: 97 dB SPL (100 Hz - 13 kHz 1/3 octave bands)
  98 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output:  120 dB SPL / 127 dB SPL (peak)
Nominal Impedances:  8 Ohms
Min Impedance:  3.7 Ohms @ 10 kHz
Nominal -6dB Beamwidth:  90° H (-8° / - 40°, 1.6 kHz - 12.5 kHz)
  90° V (+5° / - 29°, 1.6 kHz - 12.5 kHz)
Axial Q / Di:  14 / 11.5, 1.6 kHz - 12.5 kHz
Crossover Frequency:  2000 Hz
Recommended Signal Processing: 50 Hz high pass filter
Drivers:  LF (1) 12” cone
  HF (1) 1” exit, non-metallic diaphragm, Ferrofluid cooled
Driver Protection:  PowerSense™ DDP
Input Connection:  12'/4m SJOW #16 Gauge
  (12' Multi-conductor for 70V version)
Controls:  None
Enclosure:  Roto-moulded grey polyethylene
Mounting / Rigging Provisions: (5) 3/8-16 rigging points
Grille:  3-layer Weather-Stop™ (Perforated steel, foam, stainless steel mesh)
Optional Accessories: Permanent pole mount bracket (ATM PM Series)
Supplied Accessories: Stainless steel yoke bracket
Dimensions: Height: 16 in. / 406 mm
  Width: 16 in. / 406 mm
  Depth: 16 in. / 406 mm
Weight:  35 lbs. / 15.9 kg (R.5COAX-99)
  38.5 lbs. / 17.4 kg (R.5COAX-99T)
Shipping Weight:  42 lbs. / 19.1 kg
Applications
  • Convention Centers
  • Fill Speaker for Stadia, Athletic Fields, Arenas and Race Tracks
  • Outdoor Background Music / Page Systems
  • Theme and Amusement Parks
  • Fairgrounds, Rodeos, Air Shows
  • Malls, Cruise ships, Skating Rinks
  • Swimming Pools, Convention Centres
  • Portable Sound Systems

Features

  • High Fidelity
  • 200W, 100V Transformer Version
  • Roto-Molded, UV Enclosure
  • High Efficiency
  • Integral Mounting Points
  • High Power Passive Crossover
Downloads

Spec Sheet (96KB)
Brochure (925KB)
Drawings
EASE Data (109KB)

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119