R.5-94X

The R.5-94X two-way, full-range loudspeaker system is engineered to provide quality full-range sound projection in a variety of outdoor and indoor applications. It is designed to withstand exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers.

Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion.

The R.5-94X has a 12-inch (300mm) cone LF driver and a 1-inch (25 mm) exit HF compression driver with a weather resistant diaphragm. The HF driver is coupled to a nominal 90° x 40° horn. The HF assembly is coaxially mounted with the LF driver. The enclosure
and HF horn are moulded from grey polyethylene. All exposed hardware is stainless steel. The Weather-Stop™ grille assembly, retained by stainless steel screws to the front of the enclosure, consists of three layers.

All R-Series loudspeakers are protected by a 5 year limited component warranty and a 15 year limited enclosure warranty.

R.5-94X

Specification

Loudspeaker Type:  2-way, Horn-loaded co-axial, weather resistant
Operating Range:  90 Hz - 16 kHz
  90 Hz - 16 kHz (+/-5dB)
Max Input Ratings:  200W continuous, 500W program
  40 volts RMS, 89 volts momentary peak
Recommended Power Amplifier: 420W to 600W @ 8 Ohms
Sensitivity 1W/1m: 100 dB SPL (100 Hz - 125Hz 1/3 octave bands)
  101 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output:  123 dB SPL / 130 dB SPL (peak)
Nominal Impedances:  8 Ohms
Min Impedance:  4 Ohms @ 11370 Hz
Nominal -6dB Beamwidth: 90° H (+3° / -27°, 2 kHz - 12.5 kHz))
  40° V (+14° / -2°, 2 kHz - 12.5 kHz)
  100° H x 100° V @ 630 Hz
Axial Q / Di:  18.6 / 12.7, 2 kHz - 12.5 kHz
Crossover Frequency:  1.5 kHz
Recommended Signal Processing: 70 Hz high pass filter
Drivers:  LF (1) 12” weather-treated, Ferrofluid-cooled
  HF (1) 1” exit, Kaladex® diaphragm
Driver Protection:  PowerSense™ DDP
Input Connection:  12'/ 4m SJOW #16 Gauge
Controls:  None
Enclosure:  Roto-moulded grey polyethylene
Mounting / Rigging Provisions: (5) 3/8-16 rigging points
Grille:  3-layer Weather-Stop™ (Perforated steel, foam, stainless steel mesh)
Required Accessories: 70 Hz high pass filter
Optional Accessories: Pole Mount (ATM PM Series)
  TRC400 transformer
Supplied Accessories: SSYR5 Yoke bracket, stainless steel
Dimensions: Height: 16 in. / 406 mm
  Width: 16 in. / 406 mm
  Depth: 16 in. / 406 mm
Weight:  35 lb. / 15.9 kg
Shipping Weight:  42 lb. / 19.1 kg
Applications
  • Fill Speaker for Stadia, Athletic Fields, Arenas and Race Tracks
  • Outdoor Background Music / Page Systems
  • Theme and Amusement Parks
  • Fairgrounds, Rodeos, Air Shows
  • Malls, Cruiseships, Skating Rinks
  • Swimming Pools, Convention Centers
  • Portable Sound Systems

Features

  • Roto-molded, UV enclosure
  • Pattern Control down to 630 Hz
  • High Efficiency
  • Integral Mounting Points
  • High Power Passive Crossover
Downloads

Spec Sheet (142KB)
Brochure (925KB)
Drawings
EASE Data (109KB)

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119