R.5-94TX

The R.5-94TX two-way, full-range loudspeaker system is engineered to provide quality full-range sound projection in a variety of outdoor and indoor applications. It is designed to withstand exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers.

Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion.

An input transformer with switchable taps provides impedance matching to 70V or 100V lines.

The R.5-94TX has a 12-inch (300mm) cone LF driver and a 1-inch (25 mm) exit HF compression driver with a weather resistant diaphragm. The HF driver is coupled to a nominal 90° x 40° horn. The HF assembly is coaxially mounted with the LF driver. The enclosure
and HF horn are moulded from grey polyethylene. All exposed hardware is stainless steel. The Weather-Stop™ grille assembly, retained by stainless steel screws to the front of the enclosure, consists of three layers.

All R-Series loudspeakers are protected by a 5 year limited component warranty and a 15 year limited enclosure warranty.

R.5-94TX

Specification

Loudspeaker Type:  2-way, Horn-loaded co-axial, weather resistant
Operating Range:  90 Hz - 16 kHz
  90 Hz - 10 kHz (+/-5dB)
Max Input Ratings:  120W, 70V / 100V
Recommended Power Amplifier: 15W to 120W @ 70 Volts
  30W to 120W @ 100 Volts
Sensitivity 1W/1m: 98 dB SPL (100 Hz - 16 kHz 1/3 octave bands)
  99 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output on 120W Tap: 118 dB SPL(continuous level)
  124 dB SPL (peak)
Nominal Impedances (multi-tap transformer): 120W: 42 Ohms, 60W: 83 Ohms
  30W: 167 Ohms, 15W: 333 Ohms
Nominal -6dB Beamwidth: 90° H (+3° / -27°, 1 kHz - 12.5 kHz))
  40° V (+14° / -2°, 1 kHz - 12.5 kHz)
  100° H x 100° V (630 Hz)
Axial Q / Di:  18.6 / 12.7, (2 kHz - 12.5 kHz)
Crossover Frequency:  1.5 kHz
Recommended Signal Processing: 70 Hz high pass filter
Drivers:  LF (1) 12” weather-treated, Ferrofluid-cooled
  HF (1) 1” exit, Kaladex® diaphragm
Input Connection:  16-2 SJOW (12' / 4m)
Controls:  70V Switchable taps @ 15W, 30W, 60W and 120W
  100V Switchable taps @ 30W, 60W and 120W
Enclosure:  Roto-moulded grey polyethylene
Mounting / Rigging Provisions: (5) 3/8-16 rigging points
Grille:  3-layer Weather-Stop™ (Perforated steel, foam, stainless steel mesh)
Required Accessories: 70 Hz high pass filter
Supplied Accessories: SSYR5 Yoke bracket, stainless steel
Optional Accessories: Pole Mount (ATM PM Series)
Dimensions: Height: 16 in. / 406 mm
  Width: 16 in. / 406 mm
  Depth: 16 in. / 406 mm
Weight:  37 lb. / 16.7 kg
Shipping Weight:  44 lb. / 19.9 kg
Applications
  • Fill Speaker for Stadia, Athletic Fields, Arenas and Race Tracks
  • Outdoor Background Music / Page Systems
  • Theme and Amusement Parks
  • Fairgrounds, Rodeos, Air Shows
  • Malls, Cruiseships, Skating Rinks
  • Swimming Pools, Convention Centers
  • Portable Sound Systems

Features

  • Roto-molded, UV enclosure
  • Pattern Control down to 630 Hz
  • High Efficiency
  • Integral Mounting Points
  • High Power Passive Crossover
  • Multi-tap Transformer for 70V and 100V inputs
Downloads

Spec Sheet (139KB)
Brochure (925KB)
Drawings
EASE Data (109KB)

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119