R.25-94TX

The R.25-94TX is a 2-way, full-range loudspeaker system designed to provide high quality voice and music reproduction in applications requiring extreme weather resistance. It is designed to withstand
long-term exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers.

The R.25-94TX comes complete with a 120W transformer for use on 100V line systems; the transformer can be tapped at 120W, 60W or 30W.

The R.25-94TX has an 8-inch (203mm) cone LF driver and a ¾-inch (20 mm) exit HF compression driver with a weather resistant diaphragm. The HF driver is coupled to a nominal 90° x 40° horn. The HF assembly is coaxially mounted with the LF driver. The enclosure
and HF horn are moulded from UV resistant grey polyethylene. All exposed hardware is stainless steel. The Weather-Stop™ grille assembly, retained by stainless steel screws to the front of the enclosure,
consists of three layers.

All R-Series loudspeakers are protected by a 5 year limited component warranty and a 15 year limited enclosure warranty.

R.25-94TX

Specification

Loudspeaker Type:  2-way, Full-Range, Weather-Resistant
Operating Range:  100 Hz - 16000 Hz
  125 Hz - 12500 Hz (+/-4dB)
Max Input Ratings:  200W continuous, 500W Program
  40 volts RMS, 89 volts momentary peak
  70V Input taps @
120W, 60W, 30W, 15W
  100V Input taps @
120W, 60W, 30W
Recommended Power Amplifier:  400W to 600W @ 8 Ohms
Sensitivity 1W/1m: 96 dB SPL (125 Hz - 12500 Hz 1/3 octave bands)
  95 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output:  119 dB SPL / 126 dB SPL (peak)
Nominal Impedance:  8 Ohms
Min Impedance:  5.5 Ohms @ 9.7 kHz
Nominal -6dB Beamwidth: 90° H (+24° / -12°, 3.1 kHz - 12.5 kHz)
  40° V (+39° / -3°, 3.1 kHz - 12.5 kHz)
Axial Q / DI:  16.1 / 12.1, 3.1 kHz - 12.5 kHz
Crossover Frequency:  2 kHz
Recommended Signal Processing:  100 Hz High pass filter
Drivers: LF (1) 8" Cast frame, 2.5" voice coil
  HF (1) ¾" Exit compression driver, Ferrofluid-cooled
Driver Protection:  Dyna-Tech
Input Connection:  16-2 SJOW (12 ft / 4 m)
Controls:  None
Enclosure:  Rotomoulded HDPE, light grey colour
Enclosure Hardware:  None
Mounting / Rigging Provisions: (5) rigging points (M8 Hardware)
  1-3/8” pole mount socket
Grille:  16 gauge perforated stainless steel, Weather-Stop™ Grille
Required Accessories:  None
Supplied Accessories:  (1) Stainless Steel Yoke
Optional Accessories:  None
Dimensions: Height: 11.3 in. / 287 mm
  Width: 11.3 in. / 287 mm
  Depth: 13.3 in. / 338 mm
Weight:  23 lbs. / 10.4 kg
Applications
  • Convention Centers
  • Fill Speaker for Stadia, Athletic Fields, Arenas and Race Tracks
  • Outdoor Background Music / Paging Systems
  • Theme and Amusement Parks
  • Fairgrounds and Rodeos
  • Malls, Cruise Ships
  • Skating Rinks
  • Swimming Pools
  • Convention Centers

Features

  • High Fidelity
  • All Horn-Loaded
  • 120W, 100V Transformer
  • Roto-Molded, UV Resistant Enclosure
  • High Efficiency
  • Integral Mounting Points
  • High Power Passive Crossover
Downloads

Spec Sheet (1.48MB)
Brochure (925KB)
Drawings
EASE Data (109KB)

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119