Community MVP12

MVP12

The MVP12 is a full-range PA system offering the user a exceptional audio quality and reliability. The MVP12 is designed as a stand alone system, but for more demanding applications it can be used with the MVP18S subwoofer for extended bass response.

The MVP12, like all Community MVP Series II products, is covered by a no fault warranty for the first 2 years* – on top of the standard 5 year warranty.

This means that if the product fails within 2 years (even if it is due to abuse at the hands of the user) – the components required to repair them are free of charge!

The MVP12 features Community’s proprietary HF20 high frequency compression driver featuring a ferrofluid cooled non-metallic diaphragm to insure smooth performance and extremely low distortion.

In the MVP12 the HF20 is horn-loaded and combined with a 12-inch mid/bass to provide a system that is ultra-portable with compact dimensions and minimal weight.

Community's Dyna-Tech driver protection system provides all MVP Series II models with comprehensive multi-level protection, allowing the speakers to operate at their full dynamic range yet still reacting quickly to excessive musical transient peaks without the risk of damaging the speakers.

Built to withstand the stress of constant use, all MVP Series II enclosures are ruggedly constructed and covered with durable black carpeting. Rubber feet, recessed handles, 1/4-inch input connectors, two locking connectors, and a perforated 16-gauge steel grille further complement each package.

The MVP12 comes with an integral pole mounting socket allowing mounting on a tripod or the mating pole that comes with an MVP18S. Wall mounting of these products is also straightforward with the Community spigot wall brackets which are available with a fixed spigot (SWM-01) or tilting spigot (SWM-02).

*crossover and driver components only

MVP12

Specification

Loudspeaker Type	2-way, Full-range
Operating Range	70Hz - 16kHz 80Hz - 14kHz (+/-4.5dB)
Max Input Ratings	150W continuous 375W Program 35 volts RMS 77 volts momentary peak
Recommended Power Amplifier	300W to 450W @ 8 Ohms
Sensitivity 1W/1m	94 dB SPL (80 Hz - 12500 Hz 1/3 octave bands) 94 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output	116 dB SPL / 123 dB SPL (peak)
Nominal Impedance	8 Ohms
Min Impedance	3.9 Ohms @ 10570 Hz
Nominal -6db Beamwidth	90° H (+29° / -47°, 2 kHz - 12.5 kHz) 40° V (+25° / -12°, 2 kHz - 12.5 kHz)
Axial Q / DI	15.5 / 11.9, 2 kHz - 12.5 kHz
Crossover Frequency	2 kHz
Recommended Signal Processing	70Hz High pass filter
Drivers	LF 1 x 12" HF 1 x HF20"
Driver Protection	Dyna-Tech
Input Connection	(2) 1/4" Jack (2) NL4 Type Locking Connector
Controls	Mid-range Boost Switch
Enclosure	MDF
Finish	Black Carpet
Mounting / Rigging Provisions	(1) 1 3/8" stand socket (6) 5/16-18 hanging inserts
Grille	Powdercoated steel
Required Accessories	None
Supplied Accessories	None
Dimensions	Height: 531 mm (20.9") Width: 368 mm (14.5") Depth: 351 mm (13.8")
Weight	15.4 kg (34 lbs)
Shipping Weight	17.2 kg (38 lb)

Applications

Discos
Corporate Events
Live Music

Features

Dyna-Tech driver protection
2 year no fault Warranty
5 year transferable warranty
Tough carpet finished cabinets
Proprietary HF20 compression drivers

Downloads

Spec Sheet (147KB)
Brochure (716KB)
Drawings

Unit 4
Davieland Court
Ibrox Business Park
Glasgow G51 2JR

E: sales@cuk-audio.com
T: 0141 440 5333
F: 0141 440 1119